The two ends of TBI ball screw can be installed on the fixed seat and support seat after processing, and the support seat is a unified name for these two types Just put bearings inside the finished mold Used to coordinate with the rotation of the ball screw. Actually, it is installed at both ends of the ball screw to fix the screw.
Several common support methods for TBI ball screw:
1. One end is fixed with double bearings, and the other end is a cantilever, mostly used for short stroke and vertical transmission.
2. One end is fixed with double bearings, while the other end is supported by a single bearing, with a relatively simple structure. The only drawback is that the rigidity of the support at the single bearing end is slightly lower.
3. In addition, one end is fixed with double bearings, and the other end is supported with double bearings. The structure is slightly more complex, but it has better rigidity than the single bearing end support.
4. Finally, one end is fixed with double bearings, while the other end is supported by double bearings. The structure is slightly more complex, but the axial rigidity is better, making it less prone to shaking during high-speed rotation. It is especially used for horizontal arrangements, especially when there are large bidirectional loads and spans.
Shenzhen Jieyuan mainly sells various types of mechanical components such as silver linear guides, TBI ball screws, TBI linear guides, and screw support seats. With its fine workmanship and extremely high precision, it has been widely recognized in the market. If you need it, please contact us in a timely manner!
